织梦CMS - 轻松建站从此开始!

Henan Perfect Handling Equipment Co., Ltd.

广告位API接口通信错误,查看德得广告获取帮助

Precautions before using 10 ton rail powered flat transfer car

Author:perfte    Updatetime:2020-07-03 17:04   

Precautions before using 10 ton rail powered flat transfer car

Precautions before using 10 ton rail powered flat transfer car: The operator should carefully read the manual of 10 ton rail powered flat transfer carriage before using it, and be familiar with the principle and operation process of the equipment. Confirm that there are no objects stacked within one meter on both sides of the track and in the middle of the track. Check the contact between the conductive column and the rail. If not, please manually restore it. Check the wiring box for looseness or traces of fire.
Whether the copper bar wiring is loose or check whether the wiring head and the copper bar wiring in the wiring pit are loose or a trace of fire, check whether there is any abnormality in the distribution box of the vehicle, and only then can power be sent. After inserting the controller, make sure that the mode is in the jog mode, and jog to confirm that the alarm and warning lamp work normally. Then, gradually test whether each button is effective, and make sure that it can be used by the car after there is no problem. According to the transportation distance and the actual situation, switch the electric vehicle control mode. Jog mode: Press the walking direction button to start walking, and release the button to power off and stop. Long-motion mode: After pressing the walking direction button, 10 ton rail powered flat transfer car can start walking, even if the button is released, it can travel, and the stop button needs to be pressed when parking is needed. In any mode, if an emergency occurs, please press the emergency stop button immediately. Once this button is activated, the rail powered vehicle will stop immediately.